Fire Suppression Sprinkler Nozzle, Open Type, Automatic Fire Sprinkler Head, Pendent UK, 68 Degree Celsius(DN15 Upright 68)

PRODUCT SPECIFICATION:Fire Fighting Sprinkler1. Introduction:ZSTK open sprinklers are usually used in conjunction with deluge alarm valves and deluge valves to form a deluge fire extinguishing system. In the event of a fire, the rain shower system opens the water to flow into the water pipe and then sprays out from the open sprinkler to achieve the fire fighting effect. When the water curtain system is used as a fire separation, it is generally arranged in 2 rows, and the width of the water curtain should be no less than 6 meters.Main Performance Parameters:1) Rated Working Pressure: 1.2MPa2) Water Inlet Interface: DN15, DN203) Material: copper alloy2. Features:1. ZSTK open sprinklers are divided into: upright, drooping, side wall, etc.2. It is suitable for installation, and the spray angle is multi-selected; it can be used multiple times, which greatly reduces the maintenance cost of the fire extinguishing system.3. Novel structure, compact and exquisite appearance. Ensure that there is an accurate spray shape and the largest water curtain.4. The body is made of copper alloy, which is and usually chrome-plated for users.3. Details:4. Other Fire Sprinklers:5. ApplicationWidely used in restaurants, hotels, shops, commercial buildings, storage warehouse, underground garage, garment factories.6. Installation Tips:1) The nozzle installation should be carried out after the system pressure test and flushing the certificate.2) Special elbows and tees should be used for nozzle installation.3) When installing the nozzle, it is not allowed to disassemble or modify the nozzle, and it is strictly forbidden to attach any decorative coating to the nozzle.4) The sprinkler head should be installed with a special wrench, and it is strictly forbidden to use the sprinkler frame to twist; when the sprinkler frame and splash plate are deformed or the damage is released, the nozzle of the same specification and model should be replaced.5) When the nominal diameter of the nozzle is less than 10mm, a filter should be installed on the water distribution main or water distribution pipe.6) Sprinkler heads installed in places vulnerable to mechanical damage should be equipped with sprinkler protective covers.7) When installing the sprinkler, the distance between the splash plate and the ceiling, door, window, opening or wall should meet the design requirements.8) When the sprinkler splash plate is higher than the nearby beam bottom or the ventral surface of the ventilation pipe with a width less than 1.2M, the maximum vertical distance of the sprinkler water reducing plate above the beam bottom and the ventral surface of the ventilation pipe shall comply with the relevant standards.9) When the width of the ventilation duct is greater than 1.2M, the sprinkler should be installed below its ventral surface.10) When the sprinkler is installed near a partition that is not at the top, the horizontal distance and the minimum vertical distance between the sprinkler and the partition should comply with the relevant standards.==========Capacity : 20LHigh-concerned chemical : NoneMaterial : MetalSprayer Type : PumpType : SprayersSize : DN15, DN20Working Pressure : 1.2MpaType : Upright, pendent, sidewallAction Temperature : 68Material : Copper alloyApplicable Scenario : Restaurant, warehouse, house, workshop,

• Fire Suppression Sprinkler Nozzle, Open Type, Automatic Fire Sprinkler Head, Pendent Uk, 68 Degree Celsius